High voltages probe calibrator

TK series, KHT series (made by PMK)

 

Is your high voltage probe properly adjusted for your oscilloscope?
High voltage generator for high voltage probe calibration. The commonly used high-impedance high-voltage probe has adjustment points for optimal waveform observation on the oscilloscope used.
For example, a 1000:1 probe would provide a 1kV pulse output and a 1MΩ terminated oscilloscope would provide a 1V signal. By the way, when a 1V signal is applied, only 1mV is output. This will not calibrate the probe. Use a high voltage probe that has been properly calibrated by giving it the correct signal. A high-voltage calibrator is essential for this.
Perform high voltage probe adjustments to accurately capture peak pulses.

 

TK100C

KHT1000D

KHT6000C

 



specification

Item

TK100C

KHT1000D

KHT6000C

Output voltage

100V

±100/200/500/1000V
switch change

(Continuous: 100-1000V*)

500 to 6000V

DC accuracy

±0.5%

±1 / 0.5 / 0.25%

±0.1%

Rise time

<6ns

<14ns

<45ns

Overshoot

<3%

<2%

<2%

Repetition frequency

100Hz

50Hz
(Continuous: 1-100Hz*)

1 Hz

Square wave pulse width

-

5 ms

(Continuous: 1-100ms*)

1 ms

Trigger output

None

10V

5V

Trigger pulse width

5 ms

Reference value 1 μs

10 μs

External dimensions W×H×L

135 x 30 x 70 mm

250 x 140 x 300 mm

250 x 140 x 395 mm

Power supply

AC adapter (standard accessory)

AC90-250V / 50-60Hz

AC90 ~ 250V 50 ~ 60Hz

*When controlling USB interface

 

Order information

appearance

Product name

Model number / (Order number)

High voltage probe calibrator

TK100C
(896-235-000)

High voltage probe calibrator

KHT1000D
(894-235-000)

High voltage probe calibrator

KHT6000C
(894-600-000)

 

 

Current probe calibrator

KSZ series (made by PMK)

There are various types of current probes such as Hall element and Rogowski coil type, but it is a calibrator that supports accurate measurement of current amplitude and rise time of clamp type current probe.
This current probe calibrator is a device required for regular calibration to check the performance when the current probe and measuring instrument are connected.

 

KSZ10C

KSZ100C

 

specification

Item

KSZ10C

KSZ100C

Square wave current output

0.05 / 0.1 / 0.2 / 0.5 / 1/2 / 5/10 A

20/50/100 A

Rise time (20%-80%)

10-34 ns

40-120ns

Overshoot

<2%

<2%

Repetition frequency

1 Hz

0.5Hz

Square wave pulse width

1 ms

1ms(20A,50A), 0.5ms(100A)

External dimensions W×H×L

240 x 140 x 370 mm

135 x 300 x 240 mm

 

Order information

appearance

Product name

Model number

Current probe calibrator

KSZ10C

High current probe calibrator

KSZ100C